Axiohm 7156 Especificaciones descargar pdf (Pagina 36)

Setting Up and Using the Printer 7156 Owner’s Guide

October 199528

Validating and Verifying Checks

Note: If the MICR Reader feature is present, checks are verified then validated.

1. Insert the check from the front and place it on the slip table face down as

shown in the illustration.

2. Slide the check to the right until it lines up against the guide (wall).

3. Slide the check toward the back of the printer until it contacts the form stop

(it won't be able to go any further);

Or, align the check with any preset mark you may have made on the slip

table.

The green LED on the slip table turns on when the form or check is properly

inserted (it has to cover two sensors on the slip table).

4. Follow the instructions from the host system.

If the MICR Reader feature is present, the check is fed in and out while the

check numbers are read. If the check is verified as good, it is then validated.

If the check is not verified as good, it is not validated.

Note: Do not hold or keep the check from moving during the MICR Reader

transaction or the check numbers will not be read accurately.

5. Remove the check after it has been fed all the way back out.

6. Follow the instructions from the host system to finish the transaction.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 189 190

Sin comentarios

Axiohm 7156 Especificaciones Pagina 36